WM50 for branch circuit monitoring

Posted in Carlo Gavazzi Energy Solutions by Alison on October 27th 2017

When energy management is mission critical

Carlo Gavazzi’s WM50 is the latest branch power monitoring solution which reduces installation time by up to 75% when compared to existing solutions.   The WM50 is a multichannel power analyser offering Branch Circuit Power Monitoring for up to 96 channels in any combination of three-phase and single-phase loads or two-phase and single phase loads using the TCD12 split core current sensors.  

Made up of three components, the base unit provides a wide backlit LCD touch screen display to configure the system , view measurements and manages sixteen virtual alarms.  Then there are two optional  modules, one for digital I/O and the other for communication.   The WM50 feature a modular sandwich style design, which provides up to 70 percent space saving behind the panel. Users simply snap additional modules to the rear of the meter by stacking and securing them to provide digital I/O and communication using either Modbus RTU or Modbus TCP/IP.

Accuracy is ±0.2% RDG current and voltage and the meter is rated equivalent to class 0.5S (kWh) according EN62053-22 measuring all the mains electrical variable, including the harmonic distortion (THD and single harmonics up to 32nd harmonic) of current and voltage.  Together with 10 digits for total energy counting of active and reactive imported and exported energy total kWh and kvarh and partial kWh and Kvarh viewing up to 6 energy tariffs.

The free proprietary UCS configuration software (desktop or mobile version) allows for quick system configuration and diagnostics. Alternatively, an optical port is available for quick analyser configuration using OptoProg accessory module (CARLO GAVAZZI).

Applications run from cost allocation and control to critical load applications such as data centres and hospitals where high reliability and extreme measurement precision is required for monitoring of any single branch of the distribution system.

As with other Carlo Gavazzi energy meters and power analysers, the WM50 carries CE marking and UL certifications.

Enjoyed this post? Share it!

Share this article:

fb tw g+ l email

Call 01276 854110

Monday to Thursday 8am to 5pm, Friday 8am to 3pm
Recently launched new products
Car Park Displays
SBB4I range of Fire Dampers
XAP Controller and Gateway
WM15 Power Analyser
HDMS single phase motor starter
Sign Up to Our Newsletter >